Feature:
1. Applicable Car Models: OBD2 USB bluetooth diagnostic scanner is replacement for Ford Focus Classic 2005?2014, replacement for Mazda, replacement for Lincoln vehicles.
2. Basic Function: USB bluetooth diagnostic tool is used to reset fault, trouble codes, parameter ids (PIDs), change car configuration data, run tests, services procedures, program certain models.
3. Supported Software: Designed for FRScan software, compatible with software venders; for FORScan, for Elmconfig, for FF2 and for FCCus, plus for MS CAN bus and for HS CAN bus.
4. With Switch Design: The superior for ELM327 USB OBD2 scanner adapter is professionally manufactured modification to include a switch to connect to different for CAN buses.
5. Excellent Performance: The bluetooth For ELM327 USB OBD2 Scanner is especially engineered for greater fd compatibility, stable characteristics and excellent performance.
Specification:
Item Type: For ELM327 USB OBD2 Scanner
Material: ABS
Introduction:
One for ELM327 OBDII OBD2 USB with switch. Designed for communicating with replacement for Ford, replacement for Mazda, replacement for Lincoln vehicles. With this cable and the one of the supported software vendors you can detected modules which are not visible for regular OBD2 scanners. This includes showing you trouble codes, PIDs, running tests and services procedures which are never displayed by other OBD2 scanners and a standard for ELM327.
Basic Features:
Reset fault trouble codes parameter ids (PIDs)
Change car configuration data
Run tests
Services procedures
Program certain models
Pin Configurations:
Switch position one: HS CAN Occupies pins 6 and 14
Switch position two: MS CAN Occupies pins 3 and 11
Supported Software:
For FScan
For Elmconfig
For FCCus
For FF2
Plus more
Modified EML:
Please note that many replacement for Ford and replacement for Mazda models (approximately since 20032004) are equipped with for MS CAN bus, in addition to the regular for HS CAN bus. In contrast to for HS CAN bus, for MS CAN bus is not supported by the stock for ELM327, because for MS CAN
is a manufacturerspecific solution and located on non OBD2 pins. This for ELM327 has been modified to allow it to implement the for MS CAN bus.
for ELM327 supports for HS CAN from the stock, because replacement for Ford for HS CAN completely matches to the OBD2 standards. It occupies pins 6 and 14. For MS CAN bus occupies pins 3 and 11.
Supported Vehicles:
All replacement for Ford, replacement for Mazda, replacement for Lincoln vehicles that can be addressed using an ELM via an OBDII connector.
Supported Protocols:
For FRD HS CAN
For FRD MS CAN
[Equipment function] This model is a modified version of for ELM327, which can freely convert for hs can bus and for ms can bus through the switch, perfectly opening the hidden function of classic replacement for Focus.
[Hidden functions that can be turned on]
1. Average (instantaneous) fuel consumption: The fuel consumption per 100 kilometers during your driving process is displayed on the meter, so that you can better understand your car.
2. ECO mode: The vehicle will score your driving habits. The more petals, the more fuelefficient driving habits.
3. Steering power adjustment: After finishing the function, the three electronic steering power mode options (ie standard mode, comfort mode and sports mode) can be displayed in the instrument, and you can switch at any time according to your needs.
4. Automatic locking: When the vehicle speed is greater than the set value (7 kmh by default, you can set the value yourself), the four doors will be automatically locked.
5. Speeding reminder (117KM driving)
6. Shift prompt (maximum power shift prompt)
7. Reverse gear prompt (there will be a sound when the reverse gear is hung)
8. Tire pressure detection (exclusive to 2.0 models)
9. Floor light function (requires additional hardware)
10. Rearview mirror electric heating function (requires additional hardware)
11. Read the computer fault diagnosis, check the car, and eliminate the fault code.
[Special Note]
For Rom versions 0203, 0301 and any older models before 1.09 can drive instant fuel consumption and full functionality.
2. When the for ROM version is 0303, 0403 can only enable automatic locking and steering assist mode.
3. The for ROM version is 0508, 0512, which can enable average fuel consumption, boost mode, eco mode, automatic lock and other auxiliary functions.
4. 2010, 2011, 2012, 2013 classic replacement for Focus instruments all belong to 0508, 0512, can open average fuel consumption, boost mode, eco fuel saving, automatic lock and overspeed alarm, shift prompt (maximum power state) and other auxiliary functions ! For example, reading DTCs, eliminating DTCs, installing rearview mirror electric heating, rearview mirror floor lamps, opening esp menu in 2.0, enabling tire pressure monitoring, etc., modifying tire size parameters, cleaning throttle valve reset matching, etc.
[How to check the for ROM version]
1. Press and hold set for 5 seconds without loosening
2. Simultaneously insert the car key and shift to second gear
3. Press set to switch to check the for ROM versionHidden function refers to the function that already exists in the original car trip computer database, but the function option is not selected when the vehicle leaves the factory, so it cannot be displayed in the trip computer. Therefore, brushing the hidden function is to open the original hidden function, and does not rewrite the original program of the ECU!.
Package List:
1 x
For ELM327 USB OBD2 Scanner1 x CDApplicable Car Models: OBD2 USB bluetooth diagnostic scanner is replacement for Ford Focus Classic 2005?2014, replacement for Mazda, replacement for Lincoln vehicles.
Basic Function: USB bluetooth diagnostic tool is used to reset fault, trouble codes, parameter ids (PIDs), change car configuration data, run tests, services procedures, program certain models.
Supported Software: Designed for FRScan software, compatible with software venders; for FORScan, for Elmconfig, for FF2 and for FCCus, plus for MS CAN bus and for HS CAN bus.
With Switch Design: The superior for ELM327 USB OBD2 scanner adapter is professionally manufactured modification to include a switch to connect to different for CAN buses.
Excellent Performance: The bluetooth For ELM327 USB OBD2 Scanner is especially engineered for greater fd compatibility, stable characteristics and excellent performance.
