Feature:
1. Useful Battery Monitor: The car battery tester can measure voltage, current, power, charge and discharge capacity, watt hour, time and other parameters. You can also set it for overvoltage protection, undervoltage protection, overcurrent protection, overpower protection, and overtemperature protection.
2. Premium Design: Battery monitor shortcut keys are made of silicone material, which not only simplifies operation steps, but also feels comfortable. Acrylic panel design can effectively protecting the screen, easy to clean, dustproof and better light. The shunt and screws are made of brass material with good conductivity, low heat and low power consumption, will not consume too much battery power in standby mode.
3. Built in Buzzer: When a certain value of battery monitor exceeds the preset protection limit value, it will start the protection, and the alarm sound will sound and alarm, it will disconnect the circuit through the relay to protecting the instrument from damage, and relay needs to be equipped separately.
4. Real Time Monitoring: Automatically recognize and monitor current in charge or discharge, in real time, which will largely improve the overall safety.
5. Various Control Modes: Voltage tester supports display control, can provide protocol, using 485, the secondary development can be carried out on the development tools such as serial assistant. Can switch addresses. Can switch addresses, respectively control 99pcs devices. Supports mobile APP control. After downloading and installing the APP, you can view all relevant data and curves on the APP through the built in Bluetooth connection, and set all functions through the mobile APP.
6. Applicable Scenario: Voltage tester has 2.4in color display to show current function menu, parameter setting and measurement data, display information is comprehensive and user friendly, clear to see charging and discharging. Whether its ternary lithium batteries or lithium iron phosphate, or other types of batteries, as long as the battery voltage is within the measured range, all will work.
Specification:
Item Type: Smart Battery Monitor
Model: KH160F
Material: ABS, brass.
Screen: 2.4in color LED screen.
Sampling Method: Diverter
Voltage Measurement Range Under External Power Supply: 0 120V
Voltage Measurement Range when Self Powered: 10 120V
Voltage Resolution: 0.01V
Current Measurement Range: 0 600A
Current Resolution: 0.01A
Relay: No relay provided, requires self configuration.
Temperature Measurement Range: 20 120 celsius
Capacity Display Range: 0percent 100.0percent
Power Measurement Range: 0 72KW
Power Resolution: 0.01W
Ah Measurement Range: 0 9999.99Ah
Capacity Resolution: 0.001Ah
Watt Hour Measurement Range: 0 9999.99kWh
Watt hour Resolution: 0.001Wh
Time Measurement Range: 0 999:59:59S
Time Resolution: 1 Second
Bluetooth Communication Distance: The maximum accessible communication distance is 10m 32.81ft (approx.)
Voltage Accuracy: + 1percent + 2 digit.
Current Accuracy: + 1percent + 5 digit.
Sampling Rate: 1 time per second.
Measurement Board Power Consumption: About 0.4W.
Display Meter Power Consumption: About 0.5W.
Overpower Protection: 0 99999.99W
Discharge Overcurrent Protection: 100A
Charging Overcurrent Protection: 100A
Undervoltage Protection: 0 120V
External Over Temperature Protection: 20 120 celsius
Protection Recovery Time: 0 99s
Enter Standby Time: 0 60s
Delay Time Setting: 0 99s
Mailing Address: P01 P99 Of 99 in all. .
Package List:
1 x Display Module1 x Measurement Module1 x Sampler1 x Temperature Sensor1 x 5m Communication Cable1 x 3P Flat Cable1 x 4P Flat Cable1 x 3P Terminal
Note:
Please read the manual carefully before use.
