Feature:
1. The product possess portable pocket size, light weight, compact, and easy to carry
2. This welding tool adopt gas inflation, convenient for external engineering use, very practical
3. The maximum flame temperature is 1300 celsius , and the maximum temperature of the soldering iron tip is 450 celsius , which can meet the needs of various industries
4. Soldering iron pen use widely available butane gas, easy to maintain and replenish
5. The product can be used for welding, cutting, hot stamping, hot melting, burning pig hair, etc.
Specification:
Item Type: Gas Soldering Iron
Material: Plastic + aluminum alloy
Model: HT1937
Filling Capacity: 12ml
Fuel Used: Pure butane (normal lighter gas)
Temperature: The maximum flame temperature is 1300 celsius , the maximum soldering iron temperature is 450 celsius
Use Time: 5080 Minutes
Uses: Welding, cutting, hot stamping, hot melting, burn pig hair, etc.
How to Use:
Gas Filling:
1. Fill with goodquality gas, make sure that the switch is turned off, and then inflate at 0FF.
2. Introduce the gas tank into the air hole and press down to inflate.
3. Gas filling can be completed in about 10 seconds. Wait a few minutes for the gas to stabilize before using it.
4. If there is a hissing sound in the tail after filling the gas, use the pen tip to slightly press the air port to eliminate it.
Ignition:
1. Replace the soldering iron tip.
2. Push the switch to NO and hear a hissing sound.
3. Use an igniter or lighter to ignite near the joint.
4. After ignition, burn for 3 seconds. When the open flame is extinguished, the soldering iron tip will continue to heat up.
5. Adjust the size of the flame, towards the "+" direction is larger, towards "" direction is smaller.
6. The flame temperature of this product is as high as 1300 celsius (the temperature of the soldering iron tip is 450 celsius ). Please pay attention to safety when using it. After using it, turn off the switch to the OFF position.
7. When using a gas soldering iron, please pay special attention to waiting until the flame is completely eliminated. When it is red, operate again, and the flame size should not be too large to extend the life of the soldering iron tip.
8. The length of the flame is about 1.2~2.2 cm.Size(LxW): Approx. 170 x 20mm 6.7 x 0.8in.
Package List:
1 x Gas Soldering Iron1 x Soldering Iron Tip1 x User Manual
Note:
1. Replace the connector, please replace it after cooling down or replace it in advance.2. The soldering iron tip in use is hot, please do not touch it with your hands.3. The adjustment knob can control the gas output and temperature, usually in the middle position.4. After use, wait for it to cool down before storing, and don"t store it in high temperature or direct sunlight.5. Children are not suitable for use, and need to be placed in a proper place when storing.6. Please use good?quality canned gas for filling, keep away from the fire source when filling.7. Because of the gas, there is more or less slag, so it is necessary to clean the nozzle frequently.8. When cleaning, press the nozzle on the gas outlet of the gas tank to spray to achieve the cleaning effect.9. Avoid heavy falls.10. Do not try to disassemble or repair under any circumstances.The product possess portable pocket size, light weight, compact, and easy to carry
This welding tool adopt gas inflation, convenient for external engineering use, very practical
The maximum flame temperature is 1300 celsius , and the maximum temperature of the soldering iron tip is 450 celsius , which can meet the needs of various industries
Soldering iron pen use widely available butane gas, easy to maintain and replenish
The product can be used for welding, cutting, hot stamping, hot melting, burning pig hair, etc.
