Adjustable Temperature Solder Iron 80W 220V / 110V LCD Electric Soldering Iron 908S with Tips wire Tools For Welding Repair

Product Info

Voltage: AC220-240V OR AC100-130V Power: 80W Frequency: 50Hz/60Hz Temperature Range: 180~500℃/356~932℉ Temperature Stability: ±5℃ Heating Type: Wmore Ceramics Element Soldering Iron Tips: 900M-B1.2 Wire Length: 1.4m / 55.12in Soldering Iron Size: Approx.242*25*25mm/9.6*0.98*0.98in Soldering Iron Weight: Approx.96g/3.4oz Package Size: Approx. 254*55*35mm/10*2.2*1.4n Package Weight: Approx. 139g / 4.9oz Operation description Press the (+) button once to increase 1 ℃; press and hold to increase The temperature is continuous. Press the (-) button once to decrease 1 ℃; press and hold to decrease The temperature is continuous. Temperature calibration: After turning on the power for 60 seconds, put the tip of the soldering iron on the thermometer, The amount of solder on the soldering iron tip is moderate; do the test Good contact between solder joints and solder joints. When the thermometer shows a stable temperature (about 2 seconds), Write down the temperature. Temperature Calibration:

1.After 60 seconds of power on, put the soldering tip on a thermometer, and a moderate amount of solder on the soldering tip; make the test point and the soldering tip have good touch. 2.When thermometer displays a stable temperature (about 2 seconds), write down the temperature.

3.Move soldering iron away from thermometer; press the (-) and (+) button at the same time to enter temperature Calibration. 4.Input adjustment quantity. Adjustment quantity=set temperature - measured temperature (see example) 5.Press the (-) and (+) at the same time to exit temperature interface, finished. Example 1, when setting temperature is 350℃ while measured temperature is 342℃, the correction steps are as follows: a.press the (-) and (+) at the same time to enter temperature correction interface. b.press the "+" button till the LCD displays 8℃ c.press the (-) and (+) at the same time to exit temperature correction interface Example 2, when setting temperature is 350℃ while measured temperature is 330℃,the correction steps are as follows: a.press the (-) and (+) at the same time to enter temperature correction interface. b.press the (-) button till the LCD displays -20℃ c.press the (-) and (+) at the same time to exit temperature correction interface

Feature 1: Soldering iron Feature 2: soldering iron for soldering 220v Feature 3: Soldering iron electric Feature 4: Tip for soldering iron Feature 5: Soldering kit Feature 6: electric tools Feature 7: soldering Feature 8: Electronic soldering iron